How to install car stickers

Monster car stickers

More and more car owner use car stickers decorate their vehicle. For Get the best results when applying car stickers by following expert tips. Of course, choosing the right tools, in the best weather conditions, and taking plenty of time will assure effective decal application.

Things you'll need: Dish soap, Water, Spray bottle, Rag, Old debit card, credit card or IC card.

Install car stickers

1 Mix dish soap and water inside spray bottle. Mix one part dish soap with two parts water to create a reliable cleaning product.

2 Clean the surface of the body where you intend to place the decal. Spray the dish soap mix thoroughly onto the location and wash area using an old rag.

3 Remove the clear film off the decal. This will expose the adhesive side, allowing you to stick the decal to the surface quickly and easily.

4 Smooth the decal in place using an old credit card. Gently work out any ripples or air bubbles.

5 Remove the backing from the decal. Carefully complete this step so you do not pull up the decal. Smooth the decal again to the surface using an old credit card.

Install vinyl car stickers

1 Clean the glass surface thoroughly before the application of the sticker. Spray the surface with the glass cleaner and wipe the entire glass area well with the paper towels to dry the glass completely.

2 Remove the paper layer on the underside of the vinyl sticker carefully. As you handle the vinyl sticker, hold it by the outer edge of the remaining paper layer.

3 Position the vinyl sticker where you want it on the glass. Before you actually place it onto the glass, ensure you have it in the exact spot you want it. Use a ruler to find the center of the glass, if necessary.

4 Lower the vinyl sticker down onto the glass carefully in the desired location. Slide your hands firmly over the sticker from the center of the sticker to the outer edges to make the sticker smooth and remove any air bubbles trapped beneath the sticker. Work until the sticker is completely flat.

5 Peel back a corner of the remaining paper from the top of the sticker and remove this paper layer from over the sticker to finish installing the vinyl sticker on the car window.

Hope it can help you! Get the right car stickers from IBUZone.com.