Monster car stickers |
More and more car owner use car stickers
decorate their vehicle. For Get the best results when applying car stickers by
following expert tips. Of course, choosing the right tools, in the best weather
conditions, and taking plenty of time will assure effective decal application.
Things you'll need: Dish soap, Water, Spray
bottle, Rag, Old debit card, credit card or IC card.
Install car stickers
1 Mix dish soap and water inside spray
bottle. Mix one part dish soap with two parts water to create a reliable
cleaning product.
2 Clean the surface of the body where you
intend to place the decal. Spray the dish soap mix thoroughly onto the location
and wash area using an old rag.
3 Remove the clear film off the decal. This
will expose the adhesive side, allowing you to stick the decal to the surface
quickly and easily.
4 Smooth the decal in place using an old
credit card. Gently work out any ripples or air bubbles.
5 Remove the backing from the decal.
Carefully complete this step so you do not pull up the decal. Smooth the decal
again to the surface using an old credit card.
Install vinyl car stickers
1 Clean the glass surface thoroughly before
the application of the sticker. Spray the surface with the glass cleaner and
wipe the entire glass area well with the paper towels to dry the glass
completely.
2 Remove the paper layer on the underside
of the vinyl sticker carefully. As you handle the vinyl sticker, hold it by the
outer edge of the remaining paper layer.
3 Position the vinyl sticker where you want
it on the glass. Before you actually place it onto the glass, ensure you have
it in the exact spot you want it. Use a ruler to find the center of the glass,
if necessary.
4 Lower the vinyl sticker down onto the
glass carefully in the desired location. Slide your hands firmly over the
sticker from the center of the sticker to the outer edges to make the sticker
smooth and remove any air bubbles trapped beneath the sticker. Work until the
sticker is completely flat.
5 Peel back a corner of the remaining paper
from the top of the sticker and remove this paper layer from over the sticker
to finish installing the vinyl sticker on the car window.
Hope it can help you! Get the right car stickers from IBUZone.com.